Hot Sale -✨ UP TO 40% OFF + FAST SHIPPING
mildew spot remover Spray
$39.99$79.9950% off
Limited-time offer! Sale ends in
00m
:
00s
Description
1. Cracks are caused by the shrinkage of the cement at the joint of the window and the outdoor cement, which causes rainwater to enter the room from the cracks, causing the surrounding of the window to be damp, moldy and hairy for a long time.
2. After moving into the new house, the water contained in the wall did not completely evaporate, that is, the owner painted latex paint, which stuffed some of the water in the wall, causing some inner walls to sweat.
3. Cracks on the outer wall and local water seepage are also the reasons for the damp and long hair on the inner wall.
Fourth, the external wall insulation is not enough, due to the temperature difference, the internal wall sweats and grows hair.
5. During the decoration of the room, some pipes are improved to the inner wall, because the metal pipes sweat and cause the walls to be damp and moldy. "
6. The top layer is waterproof and leaking, causing the roof to be wet and hairy.
7. The original waterproof layer was damaged in the renovation and renovation, and water leaked to the bottom layer, causing black spots and mildew on the bottom roof.
8. The structural parts of the house are not smashed during the construction process, resulting in the phenomenon of bubbles and voids. In winter, the stored cold air forms a "cold bridge" phenomenon caused by the temperature difference in the room, which makes the walls damp and moldy.
Nine, because the indoor is not ventilated in winter, the humidity in the air is too high, so that the walls are moldy and so on.
Precautions
1. This product is only used for quick mildew removal on white walls and floors; please keep away from non-white fabrics, wallpapers, furniture, etc.
Natural color wall, so as not to cause fading.
2. Before use, please be sure to try it out in a small area, and confirm that there is no adverse reaction before constructing in a large area;
3. It is strongly recommended to wear gloves and masks when using. Please open the window for ventilation when using it.
4. Avoid direct contact with skin and eyes. If splashed into eyes, rinse immediately with plenty of water.
seek medical attention immediately.
5. This product should not be mixed with any other liquid.
6. Please keep this product out of the reach of children and avoid eating.
1. Cracks are caused by the shrinkage of the cement at the joint of the window and the outdoor cement, which causes rainwater to enter the room from the cracks, causing the surrounding of the window to be damp, moldy and hairy for a long time.
2. After moving into the new house, the water contained in the wall did not completely evaporate, that is, the owner painted latex paint, which stuffed some of the water in the wall, causing some inner walls to sweat.
3. Cracks on the outer wall and local water seepage are also the reasons for the damp and long hair on the inner wall.
Fourth, the external wall insulation is not enough, due to the temperature difference, the internal wall sweats and grows hair.
5. During the decoration of the room, some pipes are improved to the inner wall, because the metal pipes sweat and cause the walls to be damp and moldy. "
6. The top layer is waterproof and leaking, causing the roof to be wet and hairy.
7. The original waterproof layer was damaged in the renovation and renovation, and water leaked to the bottom layer, causing black spots and mildew on the bottom roof.
8. The structural parts of the house are not smashed during the construction process, resulting in the phenomenon of bubbles and voids. In winter, the stored cold air forms a "cold bridge" phenomenon caused by the temperature difference in the room, which makes the walls damp and moldy.
Nine, because the indoor is not ventilated in winter, the humidity in the air is too high, so that the walls are moldy and so on.
Precautions
1. This product is only used for quick mildew removal on white walls and floors; please keep away from non-white fabrics, wallpapers, furniture, etc.
Natural color wall, so as not to cause fading.
2. Before use, please be sure to try it out in a small area, and confirm that there is no adverse reaction before constructing in a large area;
3. It is strongly recommended to wear gloves and masks when using. Please open the window for ventilation when using it.
4. Avoid direct contact with skin and eyes. If splashed into eyes, rinse immediately with plenty of water.
seek medical attention immediately.
5. This product should not be mixed with any other liquid.
6. Please keep this product out of the reach of children and avoid eating.
Product Display
